G3 Carbon Speed Pro Carbon Speed Pro Tech 4 sizes & Models

G3 Carbon Speed Pro Probe  
 
When weight and safety are equal concerns, have the new G3 Carbon Speed Pro Probes in your pack.  Strong and lightning quick to deploy, the Carbon is the lightest G3 probe.    These heavier duty probes provide increased strength for fast and faultless snow penetration in all rescue situations - immediate response or final site assessment.Features:

Carbon Fiber tubing
Specialty coated stainless steel cable
Fool-proof tension mechanism
Oversized tip
Durable storage bag with positive tie-on points
240TECH & 320TECH Carbon Speed Pro TECH AVALANCHE PROBES Features precise laser etched measurement markings every 5mm, numbered at 5cm increments An indispensable snow pit and snow depth measurement tool

COLOR: Black
SIZE: LENGTH SEGMENT WEIGHT
240cm Probe / 7'-11" \t40cm \t247g / 8.7oz
240cm TECH / 7'-11" \t40cm \t247g / 8.7oz
320cm Probe / 10'-6" \t46cm \t300g / 10.6oz
320cm TECH / 10'-6" \t46cm \t300g / 10.6oz

SHORTER (40CM) SEGMENTS MAKE THE 240 AND 240TECH PROBES IDEAL FOR DAYPACKS AND METRIC SNOW PROFILE MEASUREMENTS.

ASSEMBLY INSTRUCTIONS

1 Hold cable end-loop in one hand and gently toss tubes away from body.
2 While holding tube nearest you, pull cable loop and gently shake tubes into alignment.
3 Align all tube sections to form probe.
4 Slide red nut onto the now protruding silver screw. Grasp end of protruding silver screw with your thumb and forefinger.
5 Rotate red nut clockwise to engage threading while holding screw stationary.

IMPORTANT NOTE: Do not over tighten red nut. Excess tension along the length of the probe will cause probe to flex unnecessarily. Optimal performance is achieved when red nut and silver screw are finger-tight.

TO DISASSEMBLE

Unscrew red nut while holding silver screw stationary. From tip end, pull apart tubes sequentially and fold into protective bag.