G3 Speed Pro Probe, Speed Pro Teck 6 Sizes & Models

G3 Speed Pro Probe, Speed Pro Tech 6 Sizes & Models to choose from

For emergency situations where every second counts,  G3 Speed Pro Avalanche Probes assemble with only a flick of the probe and pull of the cable.  The choice of professionals and recreationalists around the world,  G3 Speed Pro Probes are now available in six models.    200cm, 230cm, 240cm, 320cm, 240 TECH and 320TECH

Features:

Speed Cones for lightning quick assembly
Specially coated stainless cable
Fool-proof tension mechanism
Oversized tip
Durable storage bag with positive tie-on points

240TECH & 320TECH AVALANCHE PROBES
Features precise laser etched measurement markings every 5mm, numbered at 5cm increments
An indispensable snow pit and snow depth measurement tool

COLOR \tGold and Silver (200, 230, 240, 320)
Red and Black (240TECH)
 
MODEL \tSIZE \tSEGMENT LENGTH \tWEIGHT

200 Probe \t200cm / 6'7" \t40cm / 15.7in* \t227g / 8.0oz \t\t\t
230 Probe \t230cm / 7'6" \t46cm / 18in \t248g / 8.7oz \t\t\t
240 Probe \t240cm / 7'11" \t40cm / 15.7in* \t266g / 9.4oz \t\t\t
240 TECH \t240cm / 7'11" \t40cm / 15.7in* \t266g / 9.4oz \t\t\t
320 Probe \t320cm / 10'6" \t46cm / 18in \t336g / 11.9oz \t\t\t
320 TECH \t320cm / 10'6" \t46cm / 18in \t336g / 11.9oz
 
SHORTER (40CM) SEGMENTS MAKE THE 200, 240 AND 240TECH PROBES IDEAL FOR
DAYPACKS AND METRIC SNOW PROFILE MEASUREMENTS.

ASSEMBLY INSTRUCTIONS

1 Hold cable end-loop in one hand and gently toss tubes away from body.
2 While holding tube nearest you, pull cable loop and gently shake tubes into alignment.
3 Align all tube sections to form probe.
4 Slide red nut onto the now protruding silver screw. Grasp end of protruding silver screw with your thumb and forefinger.
5 Rotate red nut clockwise to engage threading while holding screw stationary.

IMPORTANT NOTE: Do not over tighten red nut. Excess tension along the length of the probe will cause probe to flex unnecessarily. Optimal performance is achieved when red nut and silver screw are finger-tight.

TO DISASSEMBLE

Unscrew red nut while holding silver screw stationary. From tip end, pull apart tubes sequentially and fold into protective bag.